We want to forward the snmp traps to another system but looks like it can only forward the traps to 162 default
Is there anyway to change the default to custom like 1602?
↧
SNMP Trap forward - Port Number change from 162 to other ports
↧
Problem getting SNMPV3 traps from DataDomain DD880
I'm having difficulty recieving SNMP traps from the DatasDomain DD880 to the HP-SIM CMS Server. HP-SIM Version is V7.5.
So far I have configured all the SNMPv3 usernames and passphases on the Data Domain and HP-SIM for the system. I have downloaded the DataDomain MIB directly from the DataDomain. I ran mcompile and mxmib to addf the MIB to HP-SIM. I have configured a Manasged System Type for the DD880 using the MIB I downloaded. I even sent as far as doing what one post suggested in setting the Java SNMP Recioever to be true in glbalsettings.prop. When I discover the DataDomain it identifies it successfully with no errors.
After all of this I test the triggering of an event by removing the power cord from one of the redundant power supplies. It triggers an email to the list of email reciepeints on the DataDomain but nothing to HP-SIM.
Can someone please tell me what I am doing wrong?
Thanks,
Phil;
↧
↧
HP SIM Systems Insight Manager 7.5.0 - Windows
Hi.
I deployed a SIM 7.5 and everything was OK but two days after I had a trouble with my conectivity. after that 90 servers show as critical "Management Processor status" in the cathegory all servers. and in Health state show as critical in All Management Processors.
How can I update the status of "Management Processor status" and "Health state".
I validated the status of my servers and are OK.
Regards.
↧
Unable to upgrade Ilo4 firmware using HPSIM 7.5 April update
Hello
When i try to upgrade my ilo4 board firmware, HPSUM hung when i try to deploy multiple firware or give me this message when i try to upgrade only one :
////////////////////////////////////////////////////////////////////////////////
// HP Smart Update Manager for Node 10.219.62.50 Started: Wed Aug 31 2016 10:52:37
// HPSUM Version: 7.5.2."2".29645M.x64
////////////////////////////////////////////////////////////////////////////////
Inventory started
Inventory completed
Analysis started
Analysis completed
Analysis started
Analysis completed
Node 10.219.62.50 is up to date, no updates were needed or nothing was installed before exiting.
////////////////////////////////////////////////////////////////////////////////
// Exit Code for Node 10.219.62.50: 3
// HP Smart Update Manager for Node 10.219.62.50 Finished Wed Aug 31 2016 10:53:20
////////////////////////////////////////////////////////////////////////////////WINDOWS_HPSUM_INSTALL_NOTE,C:\cpqsystem\hp\log\10.219.62.50
HPSUM_LOG_INFO
HPSUM_DETAIL_INFO
the target is using firmware 1.5 ...
I tried a manual upgrade after that to 2.42 with no issue
pb, i got 460 ilo4 to upgrade :(
↧
HPSIM : How to create a custom view to control IRS Ilo4 setup (Embedded Remote Support = Aggregate)
Hello
I m using both HP Insight Manager and IRS
We had an issue this summer and IRS application crashed. While restarting it, a lot of Gen8 / Gen9 equipment with ilo4 card reported a message :
Event Details: (SNMP) iLO to Insight Remote Support communication failure (9020)
in HPSIM.
I would like HPSIM to help me sort the Ilo4 / Server with IRS setup correctly working from the one with a problem
The key exist, it is :
Product Desciption \
Embedded Remote Support = Aggregate
But i do not finfd a way to setupo a cutom view in HPSIM 7.5 with it
Any idea ?
↧
↧
How to force ilo to report an incident using the server shortname instead of ilo shortname ?
Hello
I got ilo incidents reported sometimes with the ilo card shortname sometimes with the server name
Any idea how to force the incident to be reported with the server shortname ?
Thx !!!
↧
Connect sybase database of NPS server to crystal report server
Hi ,
Has anybody done connection to Sybase db of NPS to crystal report server.
I have tried to connect using devart odbc driver and giving below details
server --> IP of the NPS server
database -->PerfSpi
Username -->NpsUser
Password -->Nps!Us3r!2013
I am getting thr attached error
Is there anything missing ?
Regards
Amit
↧
VCRM unable to download VCRM_VERIFICATION.txt file, only 500 bytes served
When trying to update VCRM 7.5.1, I am getting the following errors:
Error: unable to connect.
Unknown error: 12057
Invalid HTTP status 403 trying to read file remote file C:\Windows\TEMP\wh8F95.tmp.
Error downloading remote file http://kmcs-sec-dwnld-pro.glb.itcs.hp.com/kmcs-web/swd/public/download/ftp.hp.com/pub/softlib/software13/COL62160/sy-149941-1/VCRM_VERIFICATION.txt to local file C:\Windows\TEMP\wh8F95.tmp
This occurs whether direct across the internet, or via Proxy.
From the look of the file saved in the TEMP folder, only 500 bytes of VCRM_VERIFICATION.txt are being served then the file truncates.
I have tried restarting VCRM and used multiple internet links and from different physical locations in the UK. All result in the same.
↧
Data collection found no data
I just installed SIM 7.5, I have all of my servers updated with the most recent WBEM, SMH, agentless management. SMH is configured to use WBEM. I've confirmed a test WBEM notifications gets pushed to SIM (and emailed if appropriate)... but on most of my servers under events every night when data collection runs I get "Data collection found no data":
"The data collection task could not find any data to collect. the target system may not have been running any supported instrumentation protocol, such as SNMP, WBEM or DMI."
If I look at the task itself i see:
"The Central Management System (CMS) cannot communicate with the
CIMOM locally installed on the managed system using the WBEM
protocol, Identification will try to identify Windows systems using
the WMI Mapper as proxy; for Linux and HP-UX systems, check
credentials by going to Options->Security->Credentials->System
Credentials. For Linux systems also check if the HP WBEM provider
is installed. "
Firewall is disabled on that machine as well. Credentials are correct and that user has administrator priv on that machine.
Any thoughts?
↧
↧
HP SIM 7.5.0 and SNMPv3
Hi all,
I am having a few issues with HP SIM 7.5.0 and SNMPv3, a security requirement has forced us to update all CI's on the network to use SNMPv3 rather than SNMPv2.
I am currently testing SNMPv3 on an Onboard Administrator of an enclosure, I am able to snmpwalk to the CI with the credentials but HP SIM will not discover it.
I have created the user on the OA with the following settings (credentials omitted):
- Username: admin
- Authentication: SHA1
- Password: password
- Security authNoPriv
- Access: read/write
I have also added the SNMP Alert (trap) destinations to point to my SIM server with the specified user above:
admin - 0x8000000b0453474836303559504852
At this point I am able to walk to the CI using Paessler's SNMP Tester and snmpwalk.exe, however SIM will not discover the CI even though I have entered the same credentials in the global credentials interface.
* Checking for SNMP protocol support on system...
Normal: The system did not respond to SNMP. Verify security settings and
community strings in Options->Security->Credentials->System
Credentials
* Checking for SNMPv3 protocol support on system...
Normal: The system did not respond to SNMPv3. Verify security settings and
v3 credentials in Options->Security->Credentials->System
Credentials
Does anyone know what I am doing wrong, any help appreciated... I've been at it for hours, thanks!
-Ryan
↧
More Questions regarding Agentless Management
I have some questions regarding AMS - per this thread "/t5/Systems-Insight-Manager-Forum/Data-collection-found-no-data/td-p/6896282" - but I figured I would start a new one.
1) In the iLO there is still a link/reference to the SMH on the server. However, Andrew in the above post mentioned removing the SHM when you use the AMS. Is that correct? If so, why would the iLO still have a reference to SMH in it?
2) After removing the WBEM Agents (or SMNP Agents), the SMH, and the VCAgent from the server and installing the AMS agent, I still have these installed on the server:
- HP Insight Diagnostics
- iLO Online Config Utility (I believe this is still OK - but adding it to the list just in case)
- Smart Storage Administrator
- Smart Storage Administrator CLI
- Smart Storage Diagnostics and SmartSSD Wear Gauge Utility
- Integrated Log Viewer
Do any of these alse need to be removed? For example are any of these rendered useless by the removal of the WBEM, SNMP and/or SHM and hence are no longer needed?
Thanks
NK
↧
Insight Manager 7.5.0 discovery faults
Hi folks,
I'm currently building a new HP Insight Manager for our Managed Environment where many different customer IT environments are connected with.
I have run the first time wizard and configured a couple of servers within the autodiscover window.
Unfortunately on every server I get a couple of errors. I have read many articles and topics on this forum but am lost in all information. Can someone please help me out?
Major: The system cannot be identified properly for HP SIM to manage;
unable to get one or more of the following: model, serial number or
unique identifier (UUID). For management processors, verify the
system is running the latest firmware. For Linux based operating
systems, you must have dmidecode installed, enable the
PermitRootLogin and PasswordAuthentication in sshd, and use root
sign-in credential. For HP-UX, verify the sign-in credential. For
Windows, check if WMIMapper is configured correctly on the CMS and
verify the sign-in credential.
Normal: Identification status is only available for servers, workstations,
or desktops, where monitoring is enabled. <-- is this one caused by the one above?
Minor: Identification cannot get computer system hardware data from the
WBEM / WMI providers.
Hope to hear from you.
↧
SIM - OMU Integration
Hello Support,
I am working on SIM 7.5 and i need to integrate it with OMU 8.x.
So i have downloaded HP Insight Integration for HP OperationsManager package (version 3.30) but i have noticed as prerequisites that it does not support SIM 7.5 version.
Please can you confirm it? Or is there any HF that cover this integration version as well?
Does 3.30 integration package is the latest available version about it?
Thanks.
Regards,
Fabrizio
↧
↧
HP SMH - CVE 2016-2017
Hello,
As a result of a Security Audit we found that HP SMH is vulnerable to CVE 2016-2017.
http://www.securityfocus.com/archive/1/538556
As there is no mention of this breach in Hp SMH 7.5.5.6 (lastest version we found and installed) and the corrective did not mention it
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c05111017
Is there a way to correct it ? is it possible to upgrade the openssl library installed with HP-SMH ?
Thanks for your help,
Best regards
↧
Error import MiB in HP SIM
C:\Program Files\HP\Systems Insight Manager\mibs>mcompile SL500.mib
HP Systems Insight Manager Mib Compiler, Version 5.0.2.1
Copyright (c) 2003-2006 Hewlett Packard Corporation
Compiling SL500.mib
Line: 236: Error defining registration: Invalid parent label or subid
Mib compilation failed.
↧
HPE System ManagementHomepage
I can not locate this new download veriosn ( 7.5.5.-6) for HP-UX systems.
I only see it for Windows and LINUX
↧
Agentless Management - server discovered in SIM by serial number instead of server name
I have been converting all our Gen8/9 servers over to agentless monitoring (from combination of SNMP and WBEM based host agents). Its been working great - can't believe I did not convert over sooner.
However I have one problem server - when I discover the iLO, the associated server is discovered by its serial number in SIM instead by its server name and it comes in with a status message of "Monitoring of the system is suspended indefinitely." with a gray "/" icon for the status icon instead of a green check mark.
- I am using the same discovery job as all the other iLOs
- I have confirmed the iLO and server are both in DNS correctly
- I have confirmed no firewall issues
- The AMS service is installed on the server (latest version)
- The iLO is NOT the latest firmware, but many other servers have same or older firmware, and they worked fine.
- I have rebooted the server and restarted the iLO
- I am running HP SIM 7.5 but not the most recent hotfixes. But again, other servers similar to this one worked fine.
- I have confirmed the SNMP and WBEM legacy agents have been removed
Any suggestions?
Thanks
NK
↧
↧
Can I still find version 7.3 (Linux) somewhere
Hello,
Tried to upgrade old version of SIM (probably, 7.1) with version 7.5, but it says I first must upgrade to version 7.3.
Is it still available somewhere ? (didn't find).
↧
Manage Racks information into HP SIM for DL Servers
Hello HP Expertise,
I have a big missing manageability gap for DL servers rack location management with HP SIM.
Is there a way to manage racks information for ProLiant DL servers?
At least I want to manually add server rack unit details for all rack servers.
Any advise would be appriciate. Thank you.
↧
Add Rack?
hi Experts,
As we know ,racks are found by 'Discovery..' function. If there are no onboard Administrator of c-class enclosure in this rack,it cannot be found in sim,can we create a new rack for DL's server without OA?
Thanks
As we know ,racks are found by 'Discovery..' function. If there are no onboard Administrator of c-class enclosure in this rack,it cannot be found in sim,can we create a new rack for DL's server without OA?
Thanks
↧